Diagnostic Software for European Automobiles

TWIN-COM
Dual-K  VAG/ISO <-> RS-232 Communications Interface

Out of production -- no longer available.

Click for larger picture

• Fully automatic support of for dual-K lines found in "new" (B6/8E chassis Audi A4 and 2002 Audi A6 -- no VAS-6017 required -- no manual switches!
• Fully backward compatible with most cars using a single K-line or K plus L (possible exception -- cars that that have their "Check Engine" light connected to the L-line.
• Fully automatic protection against over-current conditions on both K1 and K2/L lines, no fuses required. 
  -- Eliminates the most common failure mode.
• OBD-II made to our own specifications.  Fits even in the "tight" cars like '96 Audi A4's, '96/'97 Audi A6's and all  European B5 Passats and B5 Audi A4's. 
• Bi-Color (red/green) status/activity LED
• Potted electronics
  -- For durability and resistance to environmental hazards.
• 12 month guarantee on electronics against defects.

This adapter comes with an OBD-II type connector which plugs right in to most 1994 and newer VW's and 1996 and newer Audis.   Most 1990-1995 Audis and 1990-1993 VW's have the "2x2" data link connector, click here for more info.

Extending this Interface:

• The cable on this adapter is about 6 feet long -- just right for most laptops.   If you want to use this interface with a desktop PC, you will need a standard serial (DB9M to DB9F) extension cord.   We usually stock extensions in 15' (3m), 25' (7.5m) and 50' (15m) lengths.   See the order form for pricing.

Note:

• We do not sell any interface adapters  as a "Stand-Alone" products.   We only sell them with our VAG-COM software.

How to order:

• Out of production -- no longer available.